start page | rating of books | rating of authors | reviews | copyrights

Advanced Oracle PL/SQL Programming with Packages

Advanced Oracle PL/SQL Programming with PackagesSearch this book
Previous: VI. Testing Your Knowledge Appendix A Next: A.2 Solutions
 

A. Appendix: PL/SQL Exercises

Contents:
Exercises
Solutions

The exercises included in this appendix are designed to enhance your ability to write well-structured PL/SQL programs, and also to identify problems with existing code. I recommend that you test out your baseline PL/SQL skills on these exercises before you explore Parts III through V of this book, where you will learn how to apply your skills to building robust and reusable packages.

For solutions to these exercises, see Section A.2, "Solutions" later in this appendix.

A.1 Exercises

The exercises are arranged by topic:

Conditional logic
Loops
Exception handling
Cursors
Builtin functions
Builtin packages
Modules
Module evaluation

A.1.1 Conditional Logic

  1. Rewrite the following IF statements so that you do not use an IF statement to set the value of no_revenue . What is the difference between these two statements? How does that difference affect your answer?

    IF total_sales <= 0 THEN    no_revenue := TRUE; ELSE    no_revenue := FALSE; END IF;  IF total_sales <= 0 THEN    no_revenue := TRUE; ELSIF total_sales > 0 THEN    no_revenue := FALSE; END IF;
  2. Rewrite the following IF statement to work as efficiently as possible under all conditions, given the following information: the calc_totals numeric function takes three minutes to return its value, while the overdue_balance Boolean function returns TRUE/FALSE in less than a second.

    IF calc_totals (1994, company_id_in => 1005) AND    NOT overdue_balance (company_id_in => 1005)  THEN    display_sales_figures (1005); ELSE    contact_vendor; END IF;
  3. Rewrite the following IF statement to get rid of unnecessary nested IFs:

    IF salary < 10000  THEN     bonus := 2000; ELSE    IF salary < 20000     THEN        bonus := 1500;    ELSE       IF salary < 40000        THEN           bonus := 1000;       ELSE          bonus := 500;       END IF;    END IF; END IF;
  4. Which procedure will never be executed in this IF statement?

    IF (order_date > SYSDATE) AND order_total >= min_order_total THEN    fill_order (order_id, 'HIGH PRIORITY'); ELSIF (order_date < SYSDATE) OR       (order_date = SYSDATE) THEN    fill_order (order_id, 'LOW PRIORITY'); ELSIF order_date <= SYSDATE AND order_total < min_order_total THEN    queue_order_for_addtl_parts (order_id); ELSIF order_total = 0 THEN    disp_message (' No items have been placed in this order!'); END IF;

A.1.2 Loops

  1. How many times does the following loop execute?

    FOR year_index IN REVERSE 12 .. 1 LOOP    calc_sales (year_index); END LOOP:
  2. Select the type of loop (FOR, WHILE, simple) appropriate to meet each of the following requirements:

    1. Set the status of each company whose company IDs are stored in a PL/SQL table to closed.

    2. For each of twenty years in the loan-processing cycle, calculate the outstanding loan balance for the specified customer. If the customer is a preferred vendor, stop the calculations after twelve years.

    3. Display the name and address of each employee returned by the cursor.

    4. Scan through the list of employees in the PL/SQL table, keeping count of all salaries greater than $50,000. Don't even start the scan, though, if the table is empty or if today is a Saturday or if the first employee in the PL/SQL table is the president of the company.

  3. Identify the problems with (or areas for improvement in) the following loops. How would you change the loop to improve it?

    1. FOR i IN 1 .. 100 LOOP    calc_totals (i);    IF i > 75    THEN       EXIT;    END IF; END LOOP; 
    2. OPEN emp_cur; FETCH emp_cur INTO emp_rec; WHILE emp_cur%FOUND LOOP    calc_totals (emp_rec.salary);    FETCH emp_cur INTO emp_rec;    EXIT WHEN emp_rec.salary > 100000; END LOOP; CLOSE emp_cur; 
    3. FOR a_counter IN lo_val .. hi_val LOOP    IF a_counter > lo_val * 2    THEN       hi_val := lo_val;    END IF; END LOOP; 
    4. DECLARE    CURSOR emp_cur IS SELECT salary FROM emp;    emp_rec emp_cur%ROWTYPE BEGIN    OPEN emp_cur;    LOOP       FETCH emp_cur INTO emp_rec;       EXIT WHEN emp_cur%NOTFOUND;       calc_totals (emp_rec.salary);    END LOOP;    CLOSE emp_cur; END; 
    5. WHILE no_more_data LOOP    read_next_line (text);    no_more_data := text IS NULL;    EXIT WHEN no_more_data; END LOOP; 
    6. FOR month_index IN 1 .. 12 LOOP    UPDATE monthly_sales        SET pct_of_sales = 100     WHERE company_id = 10006       AND month_number = month_index; END LOOP; 
    7. DECLARE    CURSOR emp_cur IS SELECT ... ; BEGIN    FOR emp_rec IN emp_cur    LOOP       calc_totals (emp_rec.salary);    END LOOP;    IF emp_rec.salary < 10000    THEN       DBMS_OUTPUT.PUT_LINE ('Give ''em a raise!');    END IF;    CLOSE emp_cur; END; 
    8. DECLARE    CURSOR checked_out_cur IS        SELECT pet_id, name, checkout_date          FROM occupancy        WHERE checkout_date IS NOT NULL; BEGIN    FOR checked_out_rec IN checked_out_cur     LOOP       INSERT INTO occupancy_history (pet_id, name, checkout_date)          VALUES (checked_out_rec.pet_id,                   checked_out_rec.name,                   checked_out_rec.checkout_date);    END LOOP; END;
  4. How many times does the following WHILE loop execute?

    DECLARE    end_of_analysis BOOLEAN := FALSE;    CURSOR analysis_cursor IS SELECT ...;    analysis_rec analysis_cursor%ROWTYPE;    next_analysis_step NUMBER;    PROCEDURE get_next_record (step_out OUT NUMBER) IS    BEGIN       FETCH analysis_cursor INTO analysis_rec;       IF analysis_rec.status = 'FINAL'       THEN          step_out := 1;       ELSE          step_out := 0;       END IF;    END; BEGIN    OPEN analysis_cursor;    WHILE NOT end_of_analysis    LOOP       get_next_record (next_analysis_step);       IF analysis_cursor%NOTFOUND AND          next_analysis_step IS NULL       THEN          end_of_analysis := TRUE;       ELSE          perform_analysis;       END IF;    END LOOP; END;
  5. Rewrite the following loop so that you do not use a loop at all.

    FOR i IN 1 .. 2 LOOP    IF i = 1    THEN       give_bonus (president_id, 2000000);    ELSIF i = 2    THEN       give_bonus (ceo_id, 5000000);    END IF; END LOOP;   
  6. What statement would you remove from this block? Why?

    DECLARE    CURSOR emp_cur IS        SELECT ename, deptno, empno          FROM emp        WHERE sal < 2500;    emp_rec emp_cur%ROWTYPE; BEGIN    FOR emp_rec IN emp_cur    LOOP       give_raise (emp_rec.empno, 10000);    END LOOP; END;
    
    

A.1.3 Exception Handling

  1. In each of the following PL/SQL blocks, a VALUE_ERROR exception is raised (usually by an attempt to place too large a value into a local variable). Identify which exception handler (if any -- the exception could also go unhandled) will handle the exception by writing down the message that will be displayed by the call to PUT_LINE in the exception handler. Explain your choice.

    1. DECLARE    string_of_5_chars VARCHAR2(5); BEGIN    string_of_5_chars := 'Steven'; END; 
    2. DECLARE    string_of_5_chars VARCHAR2(5); BEGIN    BEGIN       string_of_5_chars := 'Steven';    EXCEPTION       WHEN VALUE_ERROR       THEN          DBMS_OUTPUT.PUT_LINE ('Inner block');    END; EXCEPTION    WHEN VALUE_ERROR    THEN       DBMS_OUTPUT.PUT_LINE ('Outer block'); END; 
    3. DECLARE    string_of_5_chars VARCHAR2(5) := 'Eli'; BEGIN    BEGIN       string_of_5_chars := 'Steven';    EXCEPTION       WHEN VALUE_ERROR       THEN          DBMS_OUTPUT.PUT_LINE ('Inner block');    END; EXCEPTION    WHEN VALUE_ERROR    THEN DBMS_OUTPUT.PUT_LINE ('Outer block'); END; 
    4. DECLARE    string_of_5_chars VARCHAR2(5) := 'Eli'; BEGIN    DECLARE       string_of_3_chars VARCHAR2(3) := 'Chris';    BEGIN       string_of_5_chars := 'Veva';    EXCEPTION       WHEN VALUE_ERROR       THEN DBMS_OUTPUT.PUT_LINE ('Inner block');    END; EXCEPTION    WHEN VALUE_ERROR    THEN DBMS_OUTPUT.PUT_LINE ('Outer block'); END; 
    5. DECLARE    string_of_5_chars VARCHAR2(5); BEGIN    BEGIN       string_of_5_chars := 'Steven';    EXCEPTION       WHEN VALUE_ERROR       THEN          RAISE NO_DATA_FOUND;       WHEN NO_DATA_FOUND       THEN          DBMS_OUTPUT.PUT_LINE ('Inner block');    END; EXCEPTION    WHEN NO_DATA_FOUND    THEN       DBMS_OUTPUT.PUT_LINE ('Outer block'); END; 
  2. Write a PL/SQL block that allows all of the following SQL DML statements to execute, even if any of the others fail:

    UPDATE emp SET empno = 100 WHERE empno > 5000; DELETE FROM dept WHERE deptno = 10; DELETE FROM emp WHERE deptno = 10;
  3. Write a PL/SQL block that handles by name the following Oracle error:

    ORA-1014: ORACLE shutdown in progress.

    The exception handler should, in turn, raise a VALUE_ERROR exception. Hint: use the EXCEPTION INIT pragma.

  4. When the following block is executed, which of the two messages shown below are displayed? Explain your choice.

    Message from Exception Handler

    Output from Unhandled Exception

    Predefined or programmer-defined? 

    Error at line 1: ORA-1403: no data found ORA-6512: at line 5 

    DECLARE    d VARCHAR2(1);    /* Create exception with a predefined name. */    no_data_found EXCEPTION;  BEGIN    SELECT dummy INTO d FROM dual WHERE 1=2;    IF d IS NULL     THEN       /*        || Raise my own exception, not the predefined        || STANDARD exception of the same name.       */       RAISE no_data_found;     END IF; EXCEPTION    /* This handler only responds to the RAISE statement. */    WHEN no_data_found    THEN        DBMS_OUTPUT.PUT_LINE ('Predefined or programmer-defined?'); END;
  5. I create the getval package as shown below. I then call DBMS_OUTPUT.PUT_LINE to display the value returned by the getval.get function. What is displayed on the screen?

    CREATE OR REPLACE PACKAGE getval IS    FUNCTION get RETURN VARCHAR2; END getval; / CREATE OR REPLACE PACKAGE BODY getval IS    v VARCHAR2(1) := 'abc';    FUNCTION get RETURN VARCHAR2 IS    BEGIN       RETURN v;    END; BEGIN    NULL; EXCEPTION   WHEN OTHERS THEN     DBMS_OUTPUT.PUT_LINE ('Trapped!'); END getval; /
    
    

A.1.4 Cursors

  1. What cursor-related statements are missing from the following block?

    DECLARE    CURSOR emp_cur IS SELECT * FROM emp; BEGIN    OPEN emp_cur;    FETCH emp_cur INTO emp_rec; END;
  2. What statement should be removed from the following block?

    DECLARE    CURSOR emp_cur IS SELECT * FROM emp;    emp_rec emp_cur%ROWTYPE; BEGIN    FOR emp_rec IN emp_cur    LOOP       give_raise (emp_rec.empno);    END LOOP; END;
  3. Name the cursor attribute (along with the cursor name) you would use (if any) for each of the following requirements:

    1. If the FETCH did not return any records from the company_cur cursor, exit the loop.

    2. If the number of rows deleted exceeded 100, notify the manager.

    3. If the emp_cur cursor is already open, fetch the next record. Otherwise, open the cursor.

    4. If the FETCH returns a row from the sales_cur cursor, display the total sales information.

    5. I use an implicit cursor SELECT statement to obtain the latest date of sales for my store number 45067. If no data is fetched or returned by the SELECT, display a warning.

  4. What message is displayed in the following block if the SELECT statement does not return a row?

    PROCEDURE display_dname (emp_in IN INTEGER) IS    department# dept.deptno%TYPE := NULL; BEGIN    SELECT deptno INTO department#      FROM emp     WHERE empno = emp_in;    IF department# IS NULL    THEN       DBMS_OUTPUT.PUT_LINE ('Dept is not found!');    ELSE       DBMS_OUTPUT.PUT_LINE ('Dept is ' || TO_CHAR (department#));    END IF; EXCEPTION    WHEN NO_DATA_FOUND    THEN       DBMS_OUTPUT.PUT_LINE ('No data found'); END;
  5. What message is displayed in the following block if there are no employees in department 15?

    PROCEDURE display_dept_count  IS    total_count INTEGER := 0; BEGIN    SELECT COUNT(*) INTO total_count      FROM emp     WHERE deptno = 15;    IF total_count = 0    THEN       DBMS_OUTPUT.PUT_LINE ('No employees in department!');    ELSE       DBMS_OUTPUT.PUT_LINE          ('Count of employees in dept 15 = ' || TO_CHAR (total_count));    END IF; EXCEPTION    WHEN NO_DATA_FOUND    THEN       DBMS_OUTPUT.PUT_LINE ('No data found'); END;
  6. If you fetch past the last record in a cursor's result set, what will happen?

  7. How would you change the SELECT statement in the following block's cursor so that the block can display the sum of salaries in each department?

    DECLARE    CURSOR tot_cur IS        SELECT deptno, SUM (sal)            FROM emp        GROUP BY deptno; BEGIN    FOR tot_rec IN tot_cur    LOOP       DBMS_OUTPUT.PUT_LINE           ('Total is: ' || tot_rec.total_sales);    END LOOP; END;
  8. Rewrite the following block to use a cursor parameter. Then rewrite to use a local module, as well as a cursor parameter.

    DECLARE    CURSOR dept10_cur IS        SELECT dname, SUM (sal) total_sales           FROM emp        WHERE deptno = 10;    dept10_rec dept10_cur%ROWTYPE;    CURSOR dept20_cur IS        SELECT dname, SUM (sal)            FROM emp        WHERE deptno = 20;    dept20_rec dept20_cur%ROWTYPE; BEGIN    OPEN dept10_cur;    FETCH dept10_cur INTO dept10_rec;    DBMS_OUTPUT.PUT_LINE        ('Total for department 10 is: ' || tot_rec.total_sales);    CLOSE dept10_cur;    OPEN dept20_cur;    FETCH dept20_cur INTO dept20_rec;    DBMS_OUTPUT.PUT_LINE        ('Total for department 20 is: ' || tot_rec.total_sales);    CLOSE dept20_cur; END;
  9. Place the following cursor inside a package, declaring the cursor as a public element (in the specification). The SELECT statement contains all of the columns in the emp table, in the same order.

    CURSOR emp_cur (dept_in IN INTEGER) IS    SELECT empno, ename, job, mgr, hiredate, sal, comm, deptno      FROM emp     WHERE deptno = dept_in;
    
    

A.1.5 Builtin Functions

  1. Identify the appropriate builtin to use for each of the following requirements:

    Requirement

    Builtin

    Calculate the number of days until the end of the month.

    
    

    Capitalize the first character in a word and lowercase the rest of the word.

    
    

    Convert a date to a string.

    
    

    Convert a number to a string.

    
    

    Convert a string to a date.

    
    

    Convert a string to lower case.

    
    

    Determine the length of a string.

    
    

    Determine the place of a character in the collating sequence of the character set used by the database.

    
    

    Extract the last four characters in a string.

    
    

    Extract the word found between the first and second _ delimiters in a string.

    
    

    Fill out a number in a string with leading zeroes.

    
    

    Find the last blank in a string.

    
    

    Find the Saturday nearest to the last day in March 1992.

    
    

    Find the third S in a string

    
    

    Get the first day in the month for a specified date.

    
    

    How many months are between date1 and date2 ?

    
    

    I store all my names in uppercase in the database, but want to display them in reports in upper and lowercase.

    
    

    If it is High Noon in New York, what time is it in Calcutta?

    
    

    Remove a certain prefix from a string (for example, change std_company_id to company_id ).

    
    

    Replace all instances of _ with a #.

    
    

    Return the error message associated with a SQL error code.

    
    

    Return the largest integer less than a specified value.

    
    

    Review all new hires on the first Wednesday after they'd been working for three months.

    
    

    Strip all leading numeric digits from a string.

    
    

    What is the current date and time?

    
    

    What is the date of the last day in the month?

    
    
  2. What portion of the string "Curious George deserves what he gets!" (assigned to variable curious_george ) is returned by each of the following calls to SUBSTR:

    1234567890123456789012345678901234567 Curious George deserves what he gets!

    SUBSTR Usage

    Returns

    SUBSTR (curious_george, -1)

     
    SUBSTR (curious_george, 1, 7)

     
    SUBSTR (curious_george, 9, 6)

     
    SUBSTR (curious_george, -8, 2)

     
    SUBSTR (curious_george,         INSTR (curious_george, -1, ' ') + 1)

     
    SUBSTR (curious_george,          INSTR (curious_george, ' ', -1, 3) + 1,         LENGTH ('cute'))

     
    SUBSTR (curious_george, -1 * LENGTH (curious_george))

     

A.1.6 Builtin Packages

  1. What program would you use to calculate the elapsed time of your PL/SQL code execution? To what degree of accuracy can you obtain these timings?

  2. What would you call to make your PL/SQL program pause for a specified number of seconds? What other techniques can you think of which would have this same effect?

  3. What package can you use to determine if the current session has issued a COMMIT? How would you go about obtaining this information?

  4. What do you see when you execute the following statements in SQL*Plus (assuming that you have already called SET SERVEROUTPUT ON):

    SQL> execute DBMS_OUTPUT.PUT_LINE (100); SQL> execute DBMS_OUTPUT.PUT_LINE ('     Five spaces in'); SQL> execute DBMS_OUTPUT.PUT_LINE (NULL); SQL> execute DBMS_OUTPUT.PUT_LINE (SYSDATE < SYSDATE - 5); SQL> execute DBMS_OUTPUT.PUT_LINE (TRANSLATE ('abc', NULL)); SQL> execute DBMS_OUTPUT.PUT_LINE (RPAD ('abc', 500, 'def'));
  5. When an error occurs in your program, you want to be able to see which program is currently executing. What builtin packaged function would you call to get this information? If the current program is a procedure named calc_totals in the analysis package, what would you see when you call the builtin function?

  6. You want to build a utility for DBAs that would allow them to create an index from within a PL/SQL program. Which package would you use? Which programs inside that package would be needed?

  7. You need to run a stored procedure named update_data every Sunday at 4 AM to perform a set of batch processes. Which builtin package would you use to perform this task? You will need to pass a string to the submit program to tell it how often to run update_data . What would that string be?

A.1.7 Modules

  1. In each of the following modules, identify changes you would make to improve their structure, performance, or functionality.

    1. FUNCTION status_desc (status_cd_in IN VARCHAR2) RETURN VARCHAR2 IS BEGIN    IF    status_cd_in = 'C' THEN RETURN 'CLOSED';    ELSIF status_cd_in = 'O' THEN RETURN 'OPEN';    ELSIF status_cd_in = 'A' THEN RETURN 'ACTIVE';    ELSIF status_cd_in = 'I' THEN RETURN 'INACTIVE';    END IF; END; 
    2. FUNCTION status_desc             (status_cd_in IN VARCHAR2, status_dt_out OUT DATE)  RETURN VARCHAR2 IS BEGIN    ... /* same function as above */ END; 
    3. FUNCTION company_name (company_id_in IN company.company_id%TYPE)    RETURN VARCHAR2 IS    cname company.company_id%TYPE;    found_it EXCEPTION; BEGIN    SELECT name INTO cname FROM company     WHERE company_id = company_id_in;    RAISE found_it; EXCEPTION    WHEN NO_DATA_FOUND     THEN        RETURN NULL;    WHEN found_it     THEN        RETURN cname; END; 
    4. PROCEDURE compute_net (company_id IN INTEGER) IS    balance_remaining NUMBER := annual_sales (company_id); BEGIN    FOR month_index IN 1 .. 12    LOOP       IF balance_remaining <= 0       THEN          RETURN 0;       ELSE          balance_remaining := debt (company_id, month_index);       END IF;    END LOOP; END;
  2. Given the header for calc_profit below, which of the following calls to calc_profit are valid:

    PROCEDURE calc_profit     (company_id_in IN NUMBER,     profit_out OUT NUMBER     fiscal_year_in IN NUMBER,     profit_type_in IN VARCHAR2 := 'NET_PROFITS',     division_in IN VARCHAR2 := 'ALL_DIVISIONS')

    Call to calc_profit

    Good/Bad? Why?

    calc_profit     (1005, profit_level, 1995, 'ALL', 'FINANCE');
    
    
    calc_profit     (new_company, profit_level);
    
    
    calc_profit    (company_id_in => 32, fiscal_year_in => 1995,     profit_out => big_number);
    
    
    calc_profit    (company_id_in => 32, fiscal_year_in => 1995,     profit_out => 1000);
    
    
  3. Suppose that I have a general utility that displays the contents of a PL/SQL table of dates. The header for this procedure is:

    PROCEDURE dispdates     (table_in IN PLVtab.date_table,      num_rows_in IN INTEGER,      header_in IN VARCHAR2 := NULL);

    where PLVtab.date_table is a predefined table TYPE stored in the PLVtab package. Notice that the default value for the header is NULL, which means that no header is displayed with the table contents.

    Here is an example of a call to this program:

    dispdates (birthdays, bday_count, 'List of Birthdays');

    Now suppose that you had to use dispdates to satisfy the following requirement: "Display the list of company start dates stored in the date table without any header." I can think of two ways do this:

    dispdates (company_list, num_companies);

    and:

    dispdates (company_list, num_companies, NULL);

    Which of these implementations would you choose and why? Is there any reason to choose one over the other?

A.1.8 Module Evaluation: Foreign Key Lookup

I have found that there are two ways to improve your skills in module construction:

  1. Write lots of procedures and functions.

  2. Critique someone else's efforts.

Certainly, there is no substitute for doing the work yourself. I find, on the other hand, that when I have the opportunity to look at another developer's work, a different kind of dynamic sets in. I am not sure that it speaks well of my personality, but I find it a whole lot easier to find the weaknesses in someone else's programs than in my own.

So assuming that everyone in the world in the same as me (a scary thought, but one I must entertain as a possibility), I offer a function for you to evaluate that I built myself long ago that does foreign-key lookups. No holds barred. No one to insult. See just how many problems you can find in the getkey_clrtyp . You might even try to rewrite the program to suit your tastes -- and then evaluate that!

We spend way too much of our time writing software to perform foreign key lookups. And in many situations, the interface we offer to our users to support easy access to foreign key information is inadequate. The approach I like to take is to hide the foreign keys themselves (users rarely need to know, after all, that the ID number for Acme Flooring, Inc. is 2765). Instead, I let the user type in as much of the name as she wants. I then see if there if there are any matches for that string. If there are no matches, I prompt for another entry. If there is just one match, I return the full name and the ID to the host application. If there are more than one match, I display a list.

The getkey_clrtyp function encapsulates this logic. The function itself returns a numeric code as follows:

0 = No match

1 = Unique

2 = Duplicate

It also returns through the parameter list the full name of the caller type and the numeric foreign key value. This function has a number of weaknesses in its design. See how many you can identify.

FUNCTION GETKEY_CLRTYP  (NAME_INOUT IN OUT VARCHAR2, NU_INOUT OUT NUMBER)  RETURN NUMBER IS    CURSOR CLRTYP_CUR IS        SELECT TYP_NU, TYPE_DS          FROM CALLER_TYPE        WHERE TYPE_DS LIKE NAME_INOUT || '%';    CLRTYP_REC CLRTYP_CUR%ROWTYPE;    NEXT_REC CLRTYP_CUR%ROWTYPE;    TYP_NU VARCHAR2(10) := NULL;    RETVAL NUMBER := NULL; BEGIN IF NAME_INOUT IS NOT NULL THEN OPEN CLRTYP_CUR;     FETCH CLRTYP_CUR INTO CLRTYP_REC;    IF CLRTYP_CUR%NOTFOUND    THEN RETURN 0; ELSE    FETCH CLRTYP_CUR INTO NEXT_REC;    IF CLRTYP_CUR%NOTFOUND    THEN RETVAL := 1;    ELSE RETVAL := 2;    END IF;    NU_INOUT := CLRTYP_REC.TYP_NU;    NAME_INOUT := CLRTYP_REC.TYP_DS;    END IF; CLOSE CLRTYP_CUR; RETURN RETVAL; END IF; END GETKEY_CLRTYP;


Previous: VI. Testing Your Knowledge Advanced Oracle PL/SQL Programming with Packages Next: A.2 Solutions
VI. Testing Your Knowledge Book Index A.2 Solutions

The Oracle Library Navigation

Copyright (c) 2000 O'Reilly & Associates. All rights reserved.

Library Home Oracle PL/SQL Programming, 2nd. Ed. Guide to Oracle 8i Features Oracle Built-in Packages Advanced PL/SQL Programming with Packages Oracle Web Applications Oracle PL/SQL Language Pocket Reference Oracle PL/SQL Built-ins Pocket Reference